Klarstein TOLEDO Manual De Instrucciones página 17

Problem
No wind and no steam.
Steam with peculiar
smell.
Noise.
Steam out from outlet
surrounding.
There is water in the
tank, but the device
indicates waterless.
Small mist output or
no mist output with
indicator on.
Possible Cause
The sealing ring
on the air flue was
disassembled with
distortion.
The air flue was not
locked tight.
Other dirty on the air
flue and valve body.
New device.
Dirty water or the water
in the tank for a long
time.
Less water in tank.
Resonance with the table
surface.
Clearance between
steam outlet and water
tank.
Something may stuck
the float and water can't
flow out to the water
sink.
There are scales or some
dirty on the valve body.
The water can't flow out
to the water sink.
Solution
Disassemble the air flue,
pour out the water and
clean the air flue. And
then assemble the valve
body and sealing ring to
the air flue without any
distortion.
Open the top cover and
put the device in the
shady and cool place for
12 hours.
Clean the water tank and
replace the clean water.
Add water.
Put the device on the
firm and flat place.
Soak the nozzle into the
water and use it again.
Take out the air flue
and clean it. And then
assemble it back to the
device.
Clean the air flue and
valve body and then try
again.
EN
17