Troubleshooting Guide - Singing Machine STVG-512 Manual De Instruccion

TROUBLE SHOOTING GUIDE
If you have followed the instructions and are having difficulty operating the unit, locate the
PROBLEM in the left column below. Check the corresponding POSSIBLE CAUSE column to
locate and remedy the problem.
PROBLEM
No power when the unit
is on.
No power when plugged
in.
No sound.
No sound - If audio is
going through home
stereo.
POSSIBLE CAUSE
No power plug connection at
the AC outlet.
The AC outlet may not have
power.
Volume control is set to
minimum.
Volume control on TV set/PA
system is set to minimum.
TV set/PA system power is
OFF.
AUX OUT jacks not
connected.
The wrong function is
selected.
Disc is inserted upside
down.
Disc is dirty.
Disc is scratched.
Disc is warped.
A nonstandard disc is
inserted.
Moisture has formed inside
the CD deck.
Singing Machine needs to
be reset.
Source Selection on your
stereo is not set properly.
Improper Connection to
stereo system or PA.
E14
SOLUTION
Insert the power plug into the AC
outlet.
Check the outlet with a working
lamp or other electrical appliance.
Turn up the volume.
Turn up the volume at TV/PA
system.
Turn on the power at TV/PA
system.
Follow directions on page E9 for
'Audio Connection'.
Select the correct function.
Insert disc correctly.
Wipe clean with soft cloth.
Use a new disc.
Use a new disc.
Only use discs bearing standard
logo as described on page E11.
Wait about 20 to 30 minutes to let
it dry out.
Disconnect the machine from
power source for 30 seconds.
Select AUX IN as the source for
your home stereo.
Follow direction on page E9 for
connecting to a home stereo
system.