LG LDF6920BB Instrucciones De Instalación página 5

These installation instructions are intended for use by Qualified lnstallers.
wWARNING
For personal safety, remove house fuse or open circuit breaker before installation.
Do not use an extension cord or adapter plug with this dishwasher. Electrical and grounding
connections must comply with the National Electrical Code/provincial and municipal code and/or other
local codes.
STEP 2: PREPARE THE ELECTRICAL WIRING
1. This appliance must be operated with correct
voltage as shown in this manual and on the
rating plate, and connected to a dedicated
properly grounded branch circuit, protected
by a time-delay fuse. Wiring must be 3 wires
including ground.
2. The wiring or cord should be in an accessible
location adjacent to and not behind the
dishwasher and within 4 ft. (1.2 m) of the
dishwasher side.
3. The wiring or cord must be grounded properly.
If in doubt, have it checked by a qualified
electrician. Do NOT connect any other
appliance to the same outlet.
NOTE: If you find any damage to the dishwasher, Please contact your dealer or builder immediately.
FIG. 4
I N S TA L L AT I O N I N S T RU C T I O N S
4. The wiring or cord must be routed as shown in
Fig. 4 below.
5. Make sure electrical cable is oriented in the
bottom channels as shown in the figure below.
If you find any damage to the dishwasher,
please contact your dealer or builder
immediately.
Electrical Cable
Electrical Cable
4 1/2" - 6"
4 1/2? - 6? (115 - 152mm)
(115 mm - 152 mm)
5