Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch GBM 13-2 RE Professional Manual Original

to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property dam-
age or may cause an electric shock.
Always wait until the power tool has come to a com-
u
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The power tool is suitable for drilling in wood, metal, ceramic
and plastic. Power tools with electronic control and right/left
rotation are also suitable for screwdriving and thread cut-
ting.

Technical data

Drill
Article number 3 601..
Rated power input
Max. power output
No-load speed
– 1st gear min
– 2nd gear min
Rated speed
– 1st gear min
– 2nd gear min
Rated torque (1st/2nd
gear)
Spindle collar diameter
Speed preselection
Speed control
Bosch Power Tools
... AB2 ... AB2
006 004
W 750 750
W 353 353
-1
0–1000 0–1000
-1
0–3200 0–3200
-1
500 500
-1
1750 1750
Nm 6.8/2.5 6.8/2.5
mm 43 43
● ●
● ●

Product features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
A)
(1)
Keyless chuck
(Only applies to 3 601 AB2 006/3
601 AB2 041 power tools: Keyless chuck with secur-
A)
ing ring )
(2) Front sleeve
(3) Rear sleeve
(4) Lock-on button for on/off switch
(5) Speed preselection thumbwheel
(6) On/off switch
(7) Rotational direction switch
(8) Gear selector switch
(9) Auxiliary handle (insulated gripping surface)
(10) Depth stop
(11) Handle (insulated gripping surface)
A)
(12) Chuck key
A)
(13) Keyed chuck
A)
(14) Screwdriver bit
A)
(15) Universal bit holder
(16) Securing screw for keyless/keyed chuck
B)
(17) Open-ended spanner
A)
(18) Clamping sleeve
A)
(19) Securing ring
A)
(20) Holding ring
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
B) Commercially available (not included in the scope of deliv-
ery)
... AB2 ... AB2 ... AB2
005 031 062
750 750 750
353 353 374
0–1000 0–1000 0–1100
0–3200 0–3200 0–3300
500 500 500
1750 1750 1750
6.8/2.5 6.8/2.5 6.5/2.2
43 43 43
● ●
● ●
English | 13
GBM 13-2 RE
... AB2 ... AB2
071 041
710 750
365 353
0–1000 0–1100
0–3200 0–3400
500 500
1750 1750
6.5/2.2 6.8/2.5
43 43
● ● ●
● ● ●
1 609 92A 5H2 | (20.11.2019)