Quick Search; Hold - Steren CD-550 Manual De Instrucciones

4.- Press Prog to store the selected track.
5.- Repeat steps 2 to 4 for each track you want to program, up to
20 tracks.
6.- To play the programmed sequence, press Play / Pause.
7.- To clear the programmed sequence from memory, press Stop
once
The programmed playback can be used only in Stop Mode. The programmed playback can be used only in Stop Mode.
If you want to repeat the programmed sequence, press If you want to repeat the programmed sequence, press
Mode constantly until the message REP ALL displays in the Mode constantly until the message REP ALL displays in the
LCD screen. LCD screen.

QUICK SEARCH

1.- Press SKIP BACKWARD once, to return at the beginning of
the current track.
2.- Press SKIP BACKWARD constantly, to return to preview
tracks.
3.- Press SKIP FORWARD to jump to next tracks.
4.- Press and hold SKIP FORWARD or SKIP BACKWARD for
quick search.
When you are at quick search mode, probably the sound When you are at quick search mode, probably the sound
level decrease. Finishing that function, the sound level will level decrease. Finishing that function, the sound level will
return to the original level. return to the original level.
DYNAMIC BASS BOOST
This function will enhance the bass frequencies. Just slip Bass
Boost to ON. To deactivate it, slip Bass Boost to OFF.
When you set this function, you will note an enhanced When you set this function, you will note an enhanced
sound, however, this function it will be good only in medium sound, however, this function it will be good only in medium
volume levels. If the volume level is too high, the sound may volume levels. If the volume level is too high, the sound may
listen distorted, then turn down the volume. listen distorted, then turn down the volume.
HOLD BUTTON
This function causes the unit to ignore accidental button presses.
Set to HOLD so the unit doesn't power on accidentally or play is
interrupted. The message HOLD appears on the LCD screen.
ENGLISH-9