Steren CAR-650 Manual De Instrucciones página 13

AUDIO
Audio output
Use this menu you can chose the audio output mode
from Analog / Digital to SPDIF / RAW or SPDIF / PCM.
SPDIF / OFF
Analog or digital outputs have not output signal
SPDIF / RAW
If you have connected the car stereo to a power amplifi er
through an analog or optical cable, choose this option. If
the disk is recorded in Dolby Digital, DTS or MPEG, the
audio output signal will be the same as the digital signal
(RAW format) from the disc. At the same time, the
power amplifi er must have the Dolby Digital, DTS or
MPEG decode function.
SPDIF / PCM
If the equipment is connected to a power amplifi er with 2
channels, choose this option.
If the CD to play is recorded in Dolby Digital or MPEG,
the digital or analog output will be modulated to listen it
in two channels through PCM format.
Key
This options allows you to select key up and down according
to your needs
VIDEO
Use this option to set the Brightness, Contrast, Hue, Saturation and
Sharpness.
ENGLISH-13