Mounting - sigel. Sound Balance Indicación De Montaje E Indicación De Uso

4.3

Mounting

Note
`
`
`
Warning
`
`
`
1
5
Fig. 5 Mounting procedure
The acoustic board is mounted as follows:
1. Use a spirit level to check that the acoustic board is mounted straight.
Use the enclosed drilling template and a pencil to mark dots on the wall for orientation.
2. Drill the two holes in the positions you have marked.
3. Insert the two anchors into the drilled holes.
Make sure the anchors are flush with the wall surface.
4. Attach the mounting rail and screw it securely to the wall with two screws.
Use the spirit level support on the mounting rail to ensure that the acoustic board is aligned
straight.
5. Slide the board onto the mounting rail from top left to bottom right.
Make sure that the studs on the board rail lock into the mounting rail correctly.
6. Ensure that the acoustic board is securely attached to the mounting rail and check that it
holds securely on the wall before letting go.
Repeat this procedure for all additional acoustic boards that you wish to mount.
If you wish to cover a larger surface, please refer to section 4.4: "Drilling distances –
covering a larger surface".
The acoustic board is now mounted.
9
18
We recommend that the product is mounted by a qualified person, such as your
company's facility manager.
When mounting, please allow for a gap of at least 3.5 cm to the left and at the top
between the outer edge of the acoustic board and other objects, e.g. the ceiling.
The acoustic board is always inserted into the mounting rail from top left to bot-
tom right.
We recommend using the enclosed drilling template to ensure that the acoustic
board is mounted correctly. You will also find the relevant drilling distances listed
on the previous page.
Before mounting, check that there are no service pipes, e.g. for electricity, gas or
water, in that part of the wall.
The enclosed anchors and screws are only suitable for solid, even walls.
Please use special anchors and screws for all other wall types.
Wear gloves while mounting the product to protect the fabric surface of the
acoustic edge from dirt and damage.
2
6
3
Sound Balance acoustic board
4