Positioning The Unit; Installation Instructions - H-P Products Vroom Instrucciones Para Instalar

Positioning the Unit

The Vroom (21.75" x 3" x 15.5") mounts easily in any base cabinet.
Step
1
Use template provided to
determine mounting base location.
Read instructions on template
for position. Side clearance will
vary depending on cabinet. Tape
template down to be more secure
during marking or pre-drilling.
Insert side panels.
Install Vroom in base
and snap into place.
Step
2
Once the location is
confirmed, pre-drill or mark
the 5 holes shown with an X
on the template. Use a 5/64"
drill bit to eliminate splitting
or cracking in the wood.
Step
4
Connect Tool Rack. The brush
rack attaches to the front and the
smaller piece attaches towards
the back.
Step Step
3
3
Remove the paper template &
place mounting base over pre-
drilled holes. Secure using the
provided screws. A 6" extension on
a screw gun will make this easier.
Step
5
5