Blumfeldt Greenkeeper Solar Manual De Instrucciones página 13

How to use the keys
• Press the ON/OFF button to manually turn the pump on and off.
• During programming, press the ON/OFF button to increase or decrease
the Watering Time and Interval Time.
• Press the arrow key to set the time.
• Press both arrow keys simultaneously to lock or unlock all keys.
Note: If there is too little water in the water tank, an alarm sounds. Press any
button to stop the alarm.
Programming example
Press one of the buttons. The light turns on and the control unit is ready for
programming.
Example: You want your plants to be watered every morning at 9 am for 50
seconds.
• Start programming at 9 am.
• Press the left arrow key and set the Watering Time to 50 (= 50 seconds).
• Press the right arrow key and set the watering time to 50 (= 50 seconds).
• (Interval Time) to 1 (= daily)
• Wait 5 seconds for the setting to be saved automatically. Watering will
start and your plants will be watered for 50 seconds. The next watering
will take place at 9 a.m. next day and the following days.
EN
13