Tabla de contenido
Idiomas disponibles
Idiomas disponibles
14. Do not immerse the motor unit in water.
15. Always use both hands to carry or move the device. Always remove the cord from the
plug prior to carrying or moving the device.
16. Always turn on the device with the cover (motor part, 3) placed on the bowl (1).
17. Do not remove the glass cover before switching off the device; then, place the glass
cover on the rack (13).
18. Never put the glass cover (3) directly on the table; always place it on the rack (13).
19. Do not place any glass or plastic dishes inside the device.
20. CAUTION: Be careful when removing the cooked dishes from the device as its cover,
pan and grill grates remain hot after use. Use oven gloves and tongs.
21. CAUTION: Do not pour cold water into the hot glass bowl – it will break.
22. The device heats up during operation; provide sufficient space to ensure its
ventilation.
23. Do not place paper, cardboard, plastic and other objects made with combustible
materials in the device – they can ignite.
24. Place roasting dishes only on grates – it is necessary to ensure the free flow of hot air
inside the bowl.
25. Do not place the device directly underneath electrical outlet.
26. Do not stare at the bowl; strong light can cause eye damage.
27. Do not touch hot surfaces of the device. Use protective gloves when removing
or touching any hot elements.
DESCRIPTION OF THE DEVICE
1. heat-resistant glass bowl
3. motor
5. temperature control between 65-250°C
7. vents
9. bowl stand
11. low grill grate
13. cover rack
BEFORE FIRST USE
1.
Remove all accessories from the bowl. Make sure no paper or styrofoam packing material is left in the bowl or cover.
2.
Place the bowl (1) on the stand (9) and the cover (3) on the bowl (1). Place the device on a flat, hard surface away from flammable
objects.
3.
Run the device for 5-10 minutes setting the temperature control to maximum. Heater preservative treatment will burn off.
4.
Switch off the device and allow it to cool. Wipe the underside of the cover with a slightly damp sponge. Wipe dry.
USING THE DEVICE
1.
Place the cover on the rack(13), making sure to leave the cover handle (4) in the "open" position.
2.
Place one or both grill grates (as required) in the bowl and arrange food products to ensure free air circulation.
3.
Place the cover (3) on the bowl (1). If the food sticks out from the bowl, use the extender ring (10).
4.
Set the temperature (5) and timer (6) as needed.
5.
Insert the power cord into the electric plug.
6.
Set the handle (4) to the "closed" position. The device will operate for the time set with the timer knob (6).
CAUTION: Raising the handle (4) to the "open" position results in the device immediately switching itself off regardless of the
elapsed time.
7.
Periodically check the condition of food, reducing or increasing the temperature as needed.
8.
The timer bell will ring at the end of the cycle. Air circulation and heaters are turned off.
9.
Remove the cover and place it on the rack (13). Be careful of the hot steam released from the bowl. Use tongs to remove food
and grill grates.
CAUTION: Place the hot cover only on the designated rack. Do not put it on the table or another surface because of fire hazard.
2. glass cover
4. cover handle/safety switch
6. 60-min timer
8. handles
10. ring
12. high grill grate
14. tongs for removing grill grates and dishes
4
Tabla de contenido
