LG LWHD1200R Manual De Instrucciones página 15

6
The cabinet should be installed with a very slight tilt
(about 1/2") downward toward the outside
Adjust the bolt and the nut of Sill Support
balancing the cabinet.
7
Attach the cabinet to the window stool by driving
the screws (Type B: Length 16mm (5/8 inch)
and below.) through the front angle into window
stool.
8
Pull each Frame Curtain
sash track, and repeat step 2.
9
Attach each Frame Curtain
screws (Type C).
CAUTION: Do not drill a hole in the bottom
pan. The unit is designed to operate with
approximately 1/2" of water in bottom pan.
There is no need to add water if the pan is
dry.
10
Slide the unit into the cabinet.
CAUTION: For security purpose, reinstall
screws (Type A) at cabinet's sides.
11
Cut the Foam-Strip
between the upper window sash and the lower
window sash.
for
fully to each window
the window sash using
to the proper length and insert
Screw(Type B)
6
Screw(Type B)
Sill Support
2
Screw(Type A)
Power cord
Installation
Sill Support
2
Sash track
Front Angle
6
Type C
7
Screw
(Type A)
Foam-Strip
8
Owner's Manual 15