Troubleshooting; Technical Specifications - Tool it 024212 Traducción De Las Instrucciones Originales

Translation of the original instructions

TROUBLESHOOTING

Troubleshooting
Unable to read the QR code.
Unable to download the application.
No connection to the module.
The battery status is empty.
The Wifi connection of the application
does not work.

TECHNICAL SPECIFICATIONS

Nominal voltage
Min. battery voltage
Accuracy
Max. consumption
Operating temperature
Battery type
Battery capacity
Insulation class
Output fuse
Weight
Dimensions (L x H x D)
Cable length
Eyelets
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
WIRELESS BATTERY MONITOR
Causes
The lens of your phone is too far/close
to the QR code
The internal memory of the phone is
full.
The operating system of your phone is
not compatible.
Your phone's Bluetooth® connection
is disabled.
The range of your Bluetooth® signal
is insufficient.
The output fuse is blown.
The terminals are in polarity reversal.
The Wifi connection is not available
for this module.
7 - 32 V
7 V
± 0.2 V
0.5mA to 12.5V
-20°C - +85°C
12-24 V lead-acid batteries
>5 Ah
IP65
1 A
42 g
60 x 44 x 14 mm
60 cm
2 x M6
Solutions
Place your phone's camera about 8 cm away
from the QR code for easy reading.
Free up storage space on your phone.
Update your operating system.
Activate the Bluetooth® connection on your
phone.
Move the phone closer to the battery charge
monitor to optimise the wireless communica-
tion (< 8 m).
Disconnect the battery terminals. Replace the
output fuse in accordance with its rating (1 A).
Connect the negative terminal (black) to
the battery's negative terminal (NEG, N, -).
Connect the positive terminal (red) to the
battery's positive terminal (POS, P, +).
-
EN
9