Hamilton Beach 11550 Manual De Instrucciones página 4

Assembly Instructions
1
Unpack all pieces from carton and remove any packing materials. Assemble
steam nozzle holder by pushing it onto the tube end of the retractable pole.
NOTE: Brush and Creasing Attachments are optional accessories on select
models.
4
Assemble steam nozzle holder by
pushing it onto the tube end of
the retractable pole. To extend the
retractable pole, flip each lever on
the pole to the open position.
4
5
Extend the pole up to full height; then flip levers closed to secure.
Firmly grasp base of flexible steam hose and push in tabs on both
sides. Insert into opening on steamer.
w CAUTION
Burn Hazard: Escaping steam is hot. Ensure base of
hose is fully inserted as directed. If steam is leaking around base of
hose, turn off and allow to cool before attempting to adjust the base
of hose.
2
Insert base of retractable pole into
opening on top of the steamer, lining
up the cutout notches; then slide the
ridged collar down over the opening.
6
Before First Use:
Remove ALL packing
materials from garment steamer.
3
Holding ridged collar on base of
pole, turn clockwise until tightened
and secure.
7
Hang steam nozzle/handle on
steam nozzle holder.