Functional Description - Bostitch BTE360 Manual De Instrucciones

G

functional description

A. Trigger Switch
B. Main Handle
C. Orbital Action Selector
D. Adjustable Shoe Button
oPeRATIoN/SeT-uP
WARNING:
making any adjustments or removing or installing attachments or accessories.
WARNING:
WARNING:
before making blind or plunge cuts. Failure to do so may result in electrical shock, fire,
explosion, or property damage.
WARNING:
past the shoe and the workpiece during the cut. Increased risk of personal injury, as well
as damage to the shoe and workpiece may result.
WARNING:
glasses. Also use face or dust mask if cutting operation is dusty. ALWAYS WEAR
CERTIFIED SAFETY EQUIPMENT:
WARNING:
anchored or clamped to prevent slipping.
• Switch on saw motor before applying
pressure.
• Place blade lightly against work to be cut.
WARNING:
hold and use the product with your fingers
wrapped around shoe adjustment button.
Always hold saw firmly with both hands while
cutting as shown in Figure 1. Whenever
possible, the saw shoe must be held firmly
against the material being cut. This will
prevent the saw from jumping or vibrating and
minimize blade breakage.
vARIABle SPeed SWITcH (fIGuRe 2)
The variable speed trigger switch will give you added
versatility. The further the trigger is depressed the higher the
speed of the saw. To turn the tool "OFF" release the trigger.
WARNING:
provision to lock the switch in the ON position, and should
never be locked in the ON position by any other means.
SAve THeSe INSTRucTIoNS
E
F
D
cuT HAzARd. Turn off and disconnect tool from power source before
Hold saw firmly with both hands for all cutting operations.
Inspect work area for hidden electrical wiring, gas pipes or water pipes
cuT HAzARd. Blade breakage may occur if the blade does not extend
AlWAyS use safety glasses. Everyday eyeglasses are NOT safety
cuT HAzARd. Before cutting any type of material, be sure it is firmly
cuT HAzARd. Never
cuT HAzARd. This tool has no
C
E. Secondary Gripping Handle
F. Blade Clamp
G. Adjustable Shoe
1
5
A
B
2