Germ Guardian AC5000 Instrucciones De Uso Y Cuidado página 4

INSTALLING/REMOVING COMbINATION FILTER
1. Turn off and unplug the unit.
2. Press the Lock & Release
Button and remove the
Rear Cover from the unit.
4. Before inserting new filter,
connect two filter pieces
together. Be sure the white,
pleated side of each filter piece
is facing the same direction,
then slide the plastic tabs
together and lock filter pieces
in place. Your new combination
filter is now ready to be inserted
into air purifier.
6. Reattach the Rear Cover of the unit and securely latch into place.
E-6
3. Remove the used
Combination Filter (Filter C)
and dispose of it in
the garbage.
5. Insert filter system into the unit.
Consult the arrow on the filter
for correct installation direction.
OPERATING INSTRUCTIONS
bEFORE OPERATING THE AIR PURIFIER:
1. Carefully remove your air purifier from box and bag.
2. Select a firm, level and flat location for the air purifier.
* For proper air flow, locate the unit at least 1 foot from any wall or furniture.
* Make sure none of the grills are blocked.
3. Plug the power cord into a 120V AC outlet.
IMPORTANT
:
When moving the air purifier, always lift unit by the carrying handle located on back.
OPERATING THE AIR PURIFIER:
1. Turn the air purifier ON by rotating POWER KNOB clockwise.
2. Upon turning the air purifier ON, the power indicator will be lit and the unit will be in
LOW mode ( ).
3. Rotate the POWER KNOB clockwise further to set the air purifier to MEDIUM mode (
4. Continue to rotate the POWER KNOB clockwise to set the air purifier to HIGH mode (
5. To activate the UV-C Bulb, press the UV button. Press the button again to turn OFF the
UV-C Bulb.
6. To turn the unit OFF, rotate the POWER KNOB counter-clockwise to OFF mode (
).
).
•
).
E-7