SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains
relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols
below are used to help you recognize this information.
DANGER:
Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING:
could result in death or serious injury.
CAUTION:
may result in minor or mod er ate injury.
NOTICE:
Used without the safety alert symbol indicates potentially hazardous
situation which, if not avoided, may result in property damage.
WARNING:
Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The BDUSB20 USB power source is equipped with two USB Type A charging ports and
is designed to charge or supply power to small USB compatible devices with the use of
BLACK+DECKER 20 V Max* lithium ion battery packs.
SPECIFIC SAFETY RULES
• Before using the BDUSB20 USB power source, read all instructions and cautionary markings
on the BDUSB20 USB power source, battery pack and product using the battery pack.
• Shock hazard. Do not allow any liquid to get inside the BDUSB20 USB power source.
Electric shock may result.
• Burn hazard. To reduce the risk of injury, use only BLACK+DECKER 20 V Max* lithium
ion battery packs with the BDUSB20 USB power source. Do not attempt to use it on
any other battery packs. Other types of batteries may overheat and burst resulting in
personal injury and property damage.
• This BDUSB20 USB power source is not intended for any uses other than supplying
power/charging small USB electronics. Any other uses may result in risk of fire, electric
shock or electrocution.
• Do not expose the BDUSB20 USB power source to rain or snow.
• When operating the BDUSB20 USB power source outdoors, always provide a dry location.
• Do not operate the BDUSB20 USB power source if it has received a sharp blow, been
dropped or otherwise damaged in any way. Take it to an authorized service center.
• Do not disassemble the BDUSB20 USB power source, there are no user serviceable parts.
Symbols
• The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
V ......................volts
Hz ....................hertz
min ...................minutes
or DC .......direct current
.....................Class I Construction
(grounded)
.....................Class II Construction
(double insulated)
.................Read instruction manual before use
.....................Use proper eye protection
• When using an extension cord, be sure to use one heavy enough to carry the
current your product will draw. An undersized cord will cause a drop in line voltage
Indicates a potentially hazardous situation which, if not avoided,
Indicates a potentially haz ard ous situation which, if not avoided,
A ...................amperes
W ..................watts
or AC .......alternating current
n o .................no load speed
..................earthing terminal
................safety alert symbol
.../min or rpm ....revolutions or reciprocation
per minute
..................Use proper respiratory protection
..................Use proper hearing protection
2