Tabla de contenido
Idiomas disponibles
Idiomas disponibles
DTR 113 SCR
2.2 CONECTIONS
CONNECTIONS AND PREPARATION Connecting to TV (Using AV cable)
Connect the aerial to the unit though Ant in jack.
You can connect the DVB Product to the following type of antenna
-Use a standard outdoor roof antenna intended for receiving channels between VHF and
UHF.
-Because many older roof-mounted antenna may only receive a limited number of channels,
it is difficult or impossible to receive digital channels transmitted on higher frequencies. If so,
you may replace the roof antenna.
-Some outdoor antenna are directed towards an analogue transmitter. The antenna, must be
directed towards a digital TV transmitter.
-It is not desirable to use indoor or windows or windows mounted antenna. As it will be
difficult or impossible to receive digital channels.
Connecting the power cable
Insert the plug of the power cable into the power socket.
Inserting batteries into the remote control
To open battery compartment, press catch and remove cover. Observe correct polarity
when
inserting the batteries (AAA, 2×1.5V)
Note:
If the unit no longer responds to the remote control, it is possible that the batteries are
used up.
Make sure to remove consumed batteries.
Note on the environment:
Batteries must not be disposed of in domestic waste. Batteries must be handed in to a
used-battery collection point.
Página 38
Tabla de contenido
