Blackstone Pro 1858 Manual Del Propietário página 16

Model 1858 | Owner's Manual |
14
Care & Maintenance
Section 03
CLEANING THE BURNER ASSEMBLY
Unit burners vary, however these instructions apply to all units. Clean
burner assembly and check burner for damage. If any large cracks or
holes are found, replace burner.
S T E P 0 1
Turn gas OFF at control knobs and LP cylinder. Remove
griddle top.
S T E P 0 2
Carefully detach and
remove the burner.
S T E P 0 3
Run a narrow bottle
brush through each burner
tube several times. (Do not use
wire brushes)
Additional Methods Include:
Run a stiff wire bent into a small
hook through each burner tube
several times.
Use an air hose to force air into
burner tube and out burner ports.
Check that air blows through each
hole. (Wear eye protection)
S T E P 0 4
Brush entire outer
surface of burner to remove grime.
S T E P 0 5
Clean any blocked ports
with stiff wire such as an open
paper clip. Then, carefully replace
burners and reattach. Burner
tubes must be reengaged with the
valve openings.