Fellowes POWERSHRED P-48C Guia Del Usuario página 3

OPERATION
Continuous operation:
NOTE:
after each pass to clear entry.
.
TROUBLESHOOTING
Paper jam:
1
2
Set to Reverse (R)
for 2-3 seconds
BASIC PRODUCT MAINTENANCE
OILING SHREDDER
All cross-cut shredders require oil for peak
noise when shredding and could ultimately
recommend you oil your shredder each time
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
LIMITED PRODUCT WARRANTY
defects in material and workmanship and provides service and support for 2 years from the date
PAPER
1 1 1 2
Set to Off (O) and Check paper amount
plug in
CARD
1 1 1 2
Set to Auto-On (I)
Set to Off (O) and
plug in
3 4
Set to Off (O)
and unplug
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
2
1
Set to Off (O)
1 3
Set to Auto-On (I)
3
Hold card at edge
6
5
Gently pull uncut Set to Reverse (R)
paper from paper
entry. Plug in.
3
* Apply oil Set to Reverse (R)
across entry for 2-3 seconds
1 5
4
Feed into paper Set to Off (O)
entry and release
1 5
4
Feed into center of Set to Off (O)
entry and release
Shredder doesn't start:
Make sure safety lock is in
unlock position
3