Directions For Use - Guardian Technologies SPA325 Instrucciones De Uso Y Cuidado

PRODUCT SPECIFICATIONS AND PARTS
MODEL NUMBER: SPA325
INPUT POWER SUPPLY: AC 100-240V, 50/60Hz
OUTPUT POWER SUPPLY: DC24V 500mA
Inner cover
Power/Intermittent Spray
Mist volume
AC/DC adaptor
Connector
Water outlet
Water tank
Ultrasonic disc
Empty the water in the direction of the water outlet.
Do not allow water into the air outlet, this would damage the diffuser.
E-4
TANK CAPACITY: 200 ml (6.76 of.)
DIMENSIONS: 4.527" Round x 7.16" high
WEIGHT: 1.5 lbs
Mist outlet
Outer cover
MAX
Base
Light
Bottom of unit
DC jack/adaptor input
Line marking the
maximum water level
Air outlet
Select a firm, level, flat location - at least 6 inches (15 cm) from any wall or object for proper air
flow. Place the diffuser on a water-resistant surface, as water can damage furniture and some
flooring. Do not place directly on carpet, towels, blankets or other absorbent surfaces. Keep the
unit away from any electronics sensitive to water.
Guardian Technologies will not accept responsibility for damage caused by water spillage.

DIRECTIONS FOR USE

Be careful while handling the diffuser, the glass cover is fragile and is
not attached to the plastic base. It is therefore necessary to hold the plastic
base with one hand and to keep the glass cover in the other.
2. Remove the glass outer
1. Insert the adaptor's
cover and then the inner
connector into the DC jack
cover of the diffuser.
input under the base of the
diffuser. Place the diffuser
on a flat and stable surface
and away from the edge.
5. Carefully replace the inner
4. Then add a few drops of
cover and the outer cover
essential oils (3-5 drops).
on the diffuser's base. Be
Important: Avoid adding
careful when handling, the
too many drops of oil.
glass cover is just placed
on the plastic base, it is
not attached.
SET UP
3. Pour distilled water (bottled
or tap water) into the water
tank up to the maximum
level indicated (200ml).
6. Plug the adaptor into
the outlet.
E-5