Aqua Medic T controller twin Manual De Instrucciones página 6

be controlled by the timer. It's a display only. Now, the unit is ready for use. By pressing "OK" you
will enter the display mode.
As soon as the adjusted setpoint falls below the adjusted value of the control precision, the unit
activates the power socket No. 2 and switches on the consumer (heating). When the adjusted
temperature is exceeded, the unit activates power socket No. 1 and switches on the consumer
(cooling).
Example: The setpoint is set to 25°C, the cooling and heating control precision at 1°C.
As soon as the temperature rises to 26°C
soon as the temperature drops below the
If the temperature drops to 24°C
the temperature rises more than to the
A minimum deactivation of 3 minutes prevents heating and cooling work against each
other.
The T controller twin has got a rechargeable battery so the programmed data will not be
lost in case of power failure. After starting the unit up, it takes about 24 hours until the
battery is charged and the data remain stored.
For safety reasons, you should control the nominal values, especially after a power failure.
5. Technical Data
Display:
Measurement range:
Resolution:
Loading capacity of contact:
Adjustment range:
Adjustment accuracy:
Power requirements:
Humidity:
6. Warranty
Should any defect in material or workmanship be found within 24 months of the date of purchase AB
Aqua Medic GmbH undertakes to repair or, at our option, replace the defective part free of charge –
always provided the product has been installed correctly, is used for the purpose that was intended
by us, is used in accordance with the operating instructions and is returned to us carriage paid. The
warranty term is not applicable on the all consumable products.
Proof of Purchase is required by presentation of an original invoice or receipt indicating the dealer's
name, the model number and date of purchase, or a Guarantee Card if appropriate. This warranty
may not apply if any model or production number has been altered, deleted or removed,
unauthorised persons or organisations have executed repairs, modifications or alterations, or damage
is caused by accident, misuse or neglect. Please note that the product is not defective under the
terms of this warranty where the product, or any of its component parts, was not originally designed
and / or manufactured for the market in which it is used. These statements do not affect your
statutory rights as a customer.
If your AB Aqua Medic GmbH product does not appear to be working correctly or appears to be
defective please contact your dealer in the first instance. Before calling your dealer please ensure
you have read and understood the operating instructions. If you have any questions your dealer
cannot answer please contact us.
Our policy is one of continual technical improvement and we reserve the right to modify and adjust
the specification of our products without prior notification.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
6
(setpoint
setpoint
(setpoint - control precision) the heating unit starts. As soon as
setpoint (here 25°C) the heating unit will stop.
0.1°C
0 up to 50°C
0.1°C
1,200 Watt at 220 V AC
16 – 40°C
+/- 1°C
220 V, 50 Hz
< 85%
- Technical changes reserved – 07/2016
+ control precision) the cooling unit starts. As
(here 25°C) the cooling unit will stop.