Idiomas disponibles
Idiomas disponibles
Direction for use
Positions of the control switch
Stop
High flame
Low flame - Lighting
If your ignition system is not working : you can light your plancha by inserting a long through
the gap between the plate and the housing on either side of your plancha.
Contact the customer support department.
For optimal cooking, it is recommended to take the food out of the refrigerator one hour
ahead of time, and to make sure that it is not wet.
20
Point to be checked in case of malfunction :
No inflow of gas :
1. Check that the gas supply is
open (bottle)
2. Check th contents of the gas
bottle.
3. Check that the pressure relief
valve has been properly primed (refer to
the instructions provided by the relief valve
manufacturer).
The burner does nit light up :
1. Piezzo starter failure or cable
disconnected.
2. Dirty burner or cloggerd
injector.
3. Absence of gas or insifficient
pressure.
The burner keeps going out :
1. Thermocouple failure or
improperly positioned.
2. Unsuitable weather conditions.
No spark on lighting :
1. Check the polarity of the
battery and the positioning of the spring.
Replace the battery.
