Mirabelle GALATIA MIRGA241 Instrucciones De Instalación página 3

BEFORE INSTALLATION
BEFORE INSTALLATION • Confirm that there is enough floor space to install the toilet unit and that the bathroom door will open/close
BEFORE INSTALLATION
• Confirm that there is enough floor space to install the toilet unit and that the bathroom door will open/close without obstruction.
• Confirm that there is enough floor space to install the toilet unit and that the bathroom door will open/close
without obstruction.
without obstruction.
• Water Pressure. The product is designed to operate with a minimum working pressure of 20psi
• Water Pressure. The product is designed to operate with a minimum working pressure of 20psi .
• Water Pressure. The product is designed to operate with a minimum working pressure of 20psi
INSTALLATION PROCEDURES .
.
INSTALLATION PROCEDURES
INSTALLATION PROCEDURES
8-7/8"
(225mm)
8-7/8"
Step 1: Put the toilet at the appropriate location, mark
(225mm)
8-7/8"
(225mm)
the bolt mounting locations at the rear of the bowl. This Step 1: Put the toilet at the appropriate location, mark
Step 1: Put the toilet at the appropriate location, mark
toilet does not use bolts through the closet flange. the bolt mounting locations at the rear of the bowl. This
the bolt mounting locations at the rear of the bowl. This
toilet does not use bolts through the closet flange.
toilet does not use bolts through the closet flange.
Step 2: Drill holes on the ground at the marked locations
with a 25/64" (10mm) drill bit. If installing onto concrete Step 2: Drill holes on the ground at the marked locations
Step 2: Drill holes on the ground at the marked locations
with a 25/64" (10mm) drill bit. If installing onto concrete subfloor, use expansion bolts provided.
with a 25/64" (10mm) drill bit. If installing onto concrete
subfloor, use expansion bolts provided.
subfloor, use expansion bolts provided.
12"
(305mm)
12"
(305mm)
12"
(305mm)
Step 3: Confirm that the installation area is clean,
Step 3: Confirm that the installation area is clean, especially around the toilet mounting location. If
Step 3: Confirm that the installation area is clean,
installing with a closet flange, ensure the top of the especially around the toilet mounting location. If
especially around the toilet mounting location. If
flange is level with the finished floor for proper seal. installing with a closet flange, ensure the top of the
installing with a closet flange, ensure the top of the
flange is level with the finished floor for proper seal.
Note: this toilet is Not compatible with off-set
flange is level with the finished floor for proper seal.
closet flaNges
Step 4: Mount the plastic/rubber drain adapter onto the
Step 4: Mount the plastic/rubber drain adapter onto the
outlet on the underside of the bowl. Position the toilet
Step 4: Mount the plastic/rubber drain adapter onto the
squarely to wall and with a rocking motion, press bowl outlet on the underside of the bowl. Position the toilet
outlet on the underside of the bowl. Position the toilet
down fully to ensure adapter seals into flange. squarely to wall and with a rocking motion, press bowl
squarely to wall and with a rocking motion, press bowl
down fully to ensure adapter seals into flange.
down fully to ensure adapter seals into flange.
Step 5: Alternately tighten bolts until toilet is firmly
seated on floor. Step 5: Alternately tighten bolts until toilet is firmly
Step 5: Alternately tighten bolts until toilet is firmly
CAUTION:DO NOT OVERTIGHTEN bOLTS,OR bASE seated on floor.
seated on floor.
MAY BE DAMAGED! CAUTION:DO NOT OVERTIGHTEN bOLTS,OR bASE
CAUTION:DO NOT OVERTIGHTEN bOLTS,OR bASE
MAY BE DAMAGED!
MAY BE DAMAGED!
Step 6: Apply clear silicone sealant around the toilet
edges. Step 6: Apply clear silicone sealant around the toilet
Step 6: Apply clear silicone sealant around the toilet
edges.
edges.
Step 7: Connect the inlet line to the water supply.
Step 7: Connect the inlet line to the water supply.
Step 7: Connect the inlet line to the water supply.
2
2
2
Closet Flange
(optional)
Closet Flange
Closet Flange
(optional)
(optional)