Attaching Cup Holder; Removing The Seat - UPPAbaby G-LUXE Manual Del Usuario

STroLLEr opErATIoN
ATTACHING CUp HoLDEr
rEMovING THE SEAT pAD
STEp 1: Undo buckle and slide harness fastener off
through opening in buckle clip. Repeat on other side.
STEp 3: Remove top of pad.
30C
Machine wash seat pad
CLEANING
separately in cold water on
gentle cycle with mild detergent.
UPPAbaby G-LUXE Instruction Manual
ATTACHING THE CUp HoLDEr
Snap cup holder into place using attachment pin
located below handle.
WArNING: Maximum cup holder
weight is 1.5 lbs (.7 kg). Excessive
weight may cause a hazardous,
unstable condition to exist. Do not
place hot liquids in holder.
STEp 2: Push harness straps and buckles through hole
in pad.
STEp 4: Remove bottom of pad. Carefully slide pad
off of adjustable footrest.
Do NoT bleach, iron
Dry flat and away from direct
sunlight before re-use or storage. or dry clean.
8
STroLLEr opErATIoN
rEMovING THE SEAT
release seat harness and remove seat pad prior to removing seat.
STEp 1: Remove bottom seat fabric buttonhole
openings from posts on both sides of stroller frame.
CLICK CLICK
STEp 3: Remove side seat fabric buttonhole openings
from posts on both sides of stroller frame.
STEp 5: Lift back of seat up and slide out of stroller
frame.
For removable fabrics, hand wash
CLEANING
in cold water with mild detergent.
STEp 2: Lift seat bottom pocket from both
footrest adjusters.
STEp 4: Unsnap tether on seat back from both sides
of stroller frame.
STEp 6: Slide waist straps through slot opening in seat
back.
Do NoT bleach, iron
Air dry completely and away
or dry clean.
from direct sunlight before
re-use or storage.
9 ENGLISH