USER MANUAL
·
Emptying the dust collection
·
container
See figure 8/9
Open and empty the dust collection
container into a bin, pressing button
22.
ATTENTION
Danger of incorrect use!
Incorrect use of the device
can cause damage and le-
sions.
·Only use the device having correctly as-
sembled a HEPA filter on it. If not, the
vacuumed dust could infiltrate the de-
vice.
Care and maintenance
· See fig. 7/12
ATTENTION
Danger of short circuit/elec-
·
tric shock!
·
Never place the device in water
After all emptying operations, clean the
·
HEPA filter. Put the HEPA filter back in
only when completely dry.
Clean the device casing with a damp
·
cloth, then dry it completely. No liquid
should penetrate the device.
Under no circumstances should abra-
sive detergents or solvent detergents
be used (e.g. gasoline, diluted solu-
·
tions, etc.). These detergents are cor-
rosive for the surface
Under no circumstances should you
try to repair the device yourself. If re-
pairs are necessary, contact the cu-
stomer service number.
ATTENTION: Warning
for the correct disposal of
the product.
In compliance with the laws
in force, including the Direc-
tive 2003/96/EU, we remind you that the
crossed bin symbol on the device
means the product, at the end of its use-
ful life, should be disposed of separately
from other waste.
Therefore, when its useful life is up it
must be disposed of separately from
other waste, in compliance with laws in
force. This avoids causing negative con-
sequences to health and the environ-
ment. In this way, you avoid the
sanctions in place by law for those in-
correctly disposing of the device.
CE Conformity
The device you have purchased was de-
signed and manufactured in compliance
with the E.U. standards in force.
The relevant documentation is kept by
the manufacturer/importer, ALPIAN
ITALIA SPA.
24