Tabla de contenido
Idiomas disponibles
Idiomas disponibles
UV emitted from this product. Avoid eye and skin exposure to unshielded products.
IMPORTANT SAFETY INSTRUCTIONS (Read all instructions)
•
Do
not
operate
(SPN-VIN365) with a damaged cord or if the lamp has been physically damaged.
•
Do not look directly into the light. ALWAYS wear the UV-absorbing protective glasses
provided when operating the lamp. Use in low-light conditions to achieve the best
inspection results. The darker the room, the greater the fluorescent contrast.
•
The Vintage™ 365 is not approved for use in hazardous atmospheres. Do not attempt
to use it in areas requiring explosion-proof lighting.
•
Never use this equipment in any manner not specified in these instructions because
your protection may be impaired.
•
NEVER aim the lamp in the direction of another human being. It is meant for
professional fluorescent inspections ONLY!
•
DO NOT attempt to modify the lens assembly or light output. Doing so may alter the
performance and intensity of the Vintage™ 365.
VINTAGE™ 365 OPERATION
•
The Vintage™ 365 is shipped factory set at the specified intensity for optimal perfor-
mance during inspections.
•
Carefully unpack and inspect the lamp for possible damage during shipment. If any
damage is noted, immediately notify the carrier and supplier before attempting to use
the lamp.
•
The Vintage™ 365 has a two-position rocker power switch (I–UV; O–off) on the han-
dle. Prior to using the unit, ensure that the button is in the OFF position (no light illumi-
nating from the lamp). Press the button once to turn the lamp on. Instant-on operation
ensures that the UV-A LED will reach full intensity very quickly. Check to see if the unit
is operating optimally. Press it again to turn the lamp off.
FOR PROFESSIONAL EXAMINATION USE ONLY
the
Vintage™
Rocker Switch
WARNING
365
UV-A
2
LED
NDT
Inspection
Lamp
Tabla de contenido
