Idiomas disponibles
Idiomas disponibles
Instruction for use of the height rod:
1. Before stepping onto the scale platform, the spoon should
be placed to the horizontal position and be raised over the
height of the person to be measured
2. The person may now step onto the scale platform. The
spoon should be held horizontally and above the person's
head
3. Lower the spoon carefully while keeping it horizontally till it
touches the top of the person's head gently. If the person is shorter
that 102.5 cm., push the latch to the right and lower the spoon till it
rests horizontally on the top of the person's head.
4. Get the height of the person as follows:
- If the back of the spoon points to the outer height rod, then
the height it points is the person's height.
- If the back of the spoon points to the inner height rod, then
the person's height should be read from the top to the outer
height rod (see the arrow on the outer height rod)
5. Raise the spoon horizontally above the person's head, the
person may now step off the scale platform. Hold the spoon
horizontally till the person leaves the scale
6. Put back the spoon to the vertical position and adjust the
height rod back to the rest position (i.e. the spoon should be
locked in the original place in the range of the inner height
rod and the inner height rod should be at its lowest position).
American Weigh Scales, Inc.
Cumming, GA 30041
Made In China to our exact specifications and quality control.
Pèse-personne
médical
