Bluetooth ® Pairing - HAMPTON BAY 28556 Manual Del Usario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Operation
1
Bluetooth
Pairing
®
The ceiling fan audio light kit with Bluetooth
NOTE:
Technology is compatible with iPhone, iPad, Android,
Blackberry, or similar devices whose Bluetooth
protocol is compatible with 3.0+EDR protocol. To
pair, ensure the light kit is powered up.
Pull the chain switch of the light kit to ensure the light kit is
powered up. The Bluetooth
On your Bluetooth
device, search for a new Bluetooth
®
device called "Audio Light ****" under the list of devices
available. Please note that **** is a number that corresponds
to your specific audio light kit.
If you are asked for a password, enter '1234'. Pairing is
successful when you hear a short confirmation tone from
the audio light kit.
Start streaming audio from your music source.
When the audio light kit is turned on, it will automatically
search for the last device it was connected to if the device
is within the efficient range. Most of the Bluetooth
sources support this function, but some of them might not.
In this case, you must manually set up the connection again.
If the previous Bluetooth
light kit will search for new devices.
For some Bluetooth
®
Speaker' mode should be enabled to stream audio
wirelessly.
The audio light kit is compatible with the 3.0+EDR protocol.
Full Bluetooth
functionality and volume control cannot
®
be guaranteed if the audio source has an older Bluetooth
protocol.
To pair to a new Bluetooth
current paired device. Open searching function of the new
Bluetooth
device and repeat the pairing steps as previously
®
mentioned.
function turns on automatically.
®
®
device is not available, the audio
®
devices and mobile phones, 'Stereo
device, you need to disable the
®
2
Bluetooth
Once paired, you will be able to control the playback and
®
volume through your device.
If available on your device, access the sound settings or
equalizer settings. Selecting the correct audio profile or
sometimes turning on the equalizer will improve the quality
and maximum volume of the playback.
If you wander out of range of the Bluetooth
move closer to the audio light kit. No pairing actions will be
needed if the lost connection; the devices will regain the lost
®
connection automatically.
The ceiling fan audio light kit with Bluetooth
features a built-in privacy mode which disconnects speaker
playback when a phone call is being received from the
device. It will automatically resume playback when the call
is completed.
audio
6
Audio Play
®
device, simply
®
®
Technology
Tabla de contenido
loading

Tabla de contenido