Kong ORTLES Manual Del Usuario página 8

The fishing pole Stelvio, to be used together with the Ortles winch, can be placed on the
rock or crack edge allowing the recovery or the dropping of the load directly in the empty
space, thus avoiding any rope scratching on the rock or on the ice, which would cause
dangerous frictions.
The Stelvio fishing pole is a tubular rod made of light aluminium alloy. It weighs 8 kg, is 2 m
long and can be disassembled into two pieces. The sack supplied with it allows to carry it also
on one's back. The pole is fastened through an universal joint to a small-size punched plate
for fastening it to the ground. The tab on the rest plate can be used, inserting a snaplink, for
sending back the rope during the recovery operation.
The articulated joint allows the pole
to move 120° forward and backward
(picture 8).
The two punched flanges at the upper end of the pole allow the insertion of the snaplinks for
the holding ropes. The Ortles winch is fastened to the pole by means of two screws with hand
levers and two threaded bushes as for the rest plates (picture 9).
UPPER TONGUES
LOWER TONGUES
TAB FOR
FASTENING
THE
TRANSMISSION
SNAPLINKS
KONG s.p.a. Zona Industriale -
TEL. + 39 0341 630506 • FAX. + 39 0341 641550 • EMAIL: [email protected] • WEB SITE: http://www.kong.it
Stelvio Fishing Pole
via XXV Aprile, 4 - 23804 MONTE MARENZO (LC) - ITALY
120°
FIG. 8
FIG. 8
PULLEYS
PUNCHED
FLANGES
FIG. 9
5