Idiomas disponibles
Idiomas disponibles
NOTE: Indicates special information to make maintenance easier or
NOTE:
an authorized SUZUKI dealer who has the proper tools and experience to do the job
correctly.
1. Park the motorcycle on a firm, flat surface where it will not fall over.
Preparation
for
2. Stop the engine and remove the ignition key, wait until the engine has cooled
down
installation
3. Read these instructions carefully before installation and check that all items
are correctly packed in the kit.
4. Take off original passenger seat (open with key)
5. Remove the 4 bolts that fix the seat tail cover use a screw driver PH2
Installation:
Place the Carbon seat tail cover (1) on the seat bench.
1.
Fix the carbon seat tail (1) in the reverse order of removal with the 4 screws
2.
(2) at position (a),(b),(c),(d) use a allen key 3mm. Torque the screws with 3,0
Nm and use liquid thread Lock.
Mount the passenger seat on the motorbike.
3.
Check that all the screws are tightened before riding the motorcycle.
State of the art: 05/08
_______________________________________________ SUZUKI GENUINE ACCESSORIES
®
Indicates potential hazard that could result in vehicle damage.
Instructions clearer.
Installation of this SUZUKI ORIGINAL ACCESSORY must be performed only by
.
a
b
c
d
CAUTION
CAUTION
