A
Make sure you use the correct trim strip since there is a left and a right side strip. The flexible material
should be facing forward (Figure B).
ENCLOSURE PREPARATION
WARNING
DANGER
CAUTION
NOTICE
FOR YOUR SAFETY
CAUTION
• Adjust the front foot level with the adjusting
wrench to balance and raise the dishwasher to the
enclosure height.
• Adjust the rear foot level with a screwdriver to
balance and raise the dishwasher to the enclosure
height.
NOTICE
Make sure the dishwasher is plumb and notice
dishwasher can be placed with a small clearance
under the counter top.
• Turning the screwdriver in the direction of the
black arrows will bring the dishwasher back feet
up.
FOR YOUR SAFETY
• Turning the screwdriver in the direction of the
white arrows will take the dishwasher rear feet
down.
B
9
Installing the Side
Trim Strips
• Remove the
adhesive tape
(Figure A).
• Place the trim strips
on the front edge
of the side walls
(Figure B).