Valet Mode; Panic Alarm - PNI OV288 Manual De Usuario

Valet mode

Useful function, for example, when you leave the car to the car wash.
To activate this function, start the engine, then press the Reset button for 5
seconds. The LED will stay on.

Panic alarm

When the system is armed, press the key for 2 seconds or press the key
once. The siren will sound and the lights will flash for 20 seconds.
Arming/Disarming with sound/no sound (silent mode)
When the system is disarmed, press the keys and simultaneously for
2 seconds. The signal lights will flash twice and the siren will emit two short
sounds to confirm the selection of soundless arming / disarming.
Press again the keys and simultaneously for 2 seconds, to confirm the
selection of sound arming / disarming. The signal lights will flash once and the
siren will emit 1 short sound.
Shock sensor bypass
When the system is armed, press the keys and simultaneously for 2
seconds, to deactivate the shock sensor. The siren will beep briefly, and the
signal lights will flash once to confirm.
Repeat the procedure to reactivate the shock sensor. The siren will emit two
short sounds, and the signal lights will flash twice to confirm.
Door lock timer
To set this function, please read the jumper function settings table.
User manual 4