PNI OV288 Manual De Usuario página 6

row, then leave the ignition on. The siren will sound and the LED will flash.
4. Press the key
unit. The LED will stay on. Press any other button, the siren will emit
a short sound, and the LED will turn off to confirm the learning of the
remote control.
5. The LED will start flashing again waiting for a new learning process.
Repeat the procedure to learn a new remote control. The system supports
a maximum of 6 remote controls.
6. To exit the learning mode, turn the ignition off.
Delete a paired remote control
After entering the learning mode (step no. 3 from the previous procedure),
press the Reset button once. The siren will sound briefly once. Now, all the
remote controls saved in the system have been deleted.
Jumper function settings
Jumper Function
Locking / unlocking doors when
S0
starting / stopping the engine
S1 Door open alarm
S2 Double impulse closure
S3 Door lock timer
Warnings
• We recommend that you install the control unit in a safe place under the
dashboard.
• Follow the connection diagram attached to this manual to make all
connections.
• Properly connect the control unit, shock sensor, LED and reset button.
User manual
on the remote control to send a signal to the control
ON OFF
Enable Disable
Enable Disable
Enable Disable
0.8 sec. 3.5 sec.
6