KTM Power Parts 45212948244 Manual Del Usuario página 8

7
7
9
8
11
11
3
13
14
-
-
-
8
D
-
-
10
-
-
E
-
-
12
-
-
-
NOTE:
For the sequence of parts, see Figure F.
(3)
(13) Throttle slide spring
(14) Spring retainer
(15) Throttle slide with jet needle
14
15
F
-
-
Loosen the screws (7).
Turn the carburetor to the side (Figure D).
Release the screw (8) and remove the throttle slide cover with the throttle
slide.
Pull back the spring retainer and throttle slide spring.
Detach the throttle cable wire (9).
Take off the throttle slide.
Remove the needle and mount the clip (10) at position 3 (see Figure E).
Turn the carburetor by 180°.
Remove the screws (11) of the float chamber.
Remove the main jet (12) and mount the main jet 55 (included) with
3 Nm.
Position the float chamber and mount the screws (11) (2 Nm).
Reassemble the throttle cable and throttle slide.
Throttle slide cover (included)
Slide the throttle slide cover (3) (included) and throttle slide spring (13)
onto the throttle cable wire.
Pull back the throttle slide spring and mount the spring retainer (14).