Component Names - BGS technic 873 Manual De Instrucciones

Please observe the following notes to avoid accident or breakdown.

This product was designated for plastic repair. Do not use it for purposes other than the original
usage.

The device may be used only with suitable brackets.

Please carry out use within 3 minutes, with a switch grip switched on.

The unit must be repaired only by authorized service personnel.

When you plug in and / or disconnect the plug, please hold the plug itself. (Do not pull the cable.)

2. COMPONENT NAMES

Input
cable
Power Plug
Repair pin holder
3. SPECIFICATIONS
Power supply: 220 - 240V AC 50 / 60Hz
Power consumption: 12.6 watts
Output voltage: L = 0,62V (4,9A)
M = 0,66V
H = 0.68V (5.6A)
Fuse: 500 mA (5 x 20 mm)
SW-Stahl und Werkzeugvertriebs GmbH
L e v e k r u s r e t S a r s s e 6 5
D 4 - 2 8 9 7 R e m s c h e d i
(5,2A)
Tel. +49 (0) 2191 / 46438-0
F ax +49 (0) 2191 / 46438-40
- E M
Control LEDs and Switches
for power ON / OFF and power ranges
Fuse
Grip
Switch for heating shaped
a : l i n i o f @ s w s a t l h d . e
Output
cable