Andis BTF3 Instrucciones De Uso Y Cuidado página 3

damaged, or dropped into water. Return the appliance
to an Andis Authorized Service Station for examination
and repair.
5. Keep the cord away from heated surfaces.
6. Never drop or insert any object into any opening.
7. Do not use outdoors or operate where aerosol (spray)
products are being used or where oxygen is being
administered.
8. Do not use this appliance with a damaged or broken
blade or comb, as injury to the skin may occur.
9. To disconnect turn control to OFF then remove plug from
outlet.
10. Use only the charger supplied by the manufacturer to
recharge.
11. Before plugging in, read the information about dual
voltage contained in the instruction section of this manual.
SAVE THESE INSTRUCTIONS
THIS PRODUCT INTENDED FOR COMMERCIAL USE
OPERATING INSTRUCTIONS
Before starting trimmer remove blade guard (some models may not have a
blade guard). Plug cord into electrical outlet, operate at 120 volt, 60 cycle
AC electrical current or as noted on the unit. To start trimmer, move ON/
OFF switch button to ON position, to stop, move switch button back to
original position. After using your Andis trimmer, rewrap cord and store in a
safe place.
UNIVERSAL AC/DC POWER ADAPTER
The unit is equipped with a universal AC/DC power adapter.
CHARGING TRIMMER
This battery charger is intended for use with Andis model BTF3 lithium-ion
battery with a rated capacity of 3.7V
AC adapter from the carton. Plug the adapter into a 120V AC outlet, or
according to your local power standards. Confirm the voltage available at
2.8 Wh. Remove the trimmer and
3