Honeywell AD27 Manual De Instrucciones

CN50 and CN51 Single Dock Compliance Insert
Model AD27
For Users in English-Speaking Regions (en)
Caution: This marking indicates that the user should read all included documentation before use. Retain this supplement for future
reference.
Users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories
other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the
compliance of this product and may result in the loss of the user's authority to operate the equipment.
Product documentation is available at www.honeywellaidc.com.
Caution: For use with Intermec Model(s) CN50, 1015CP01, 1015CP01S, and 1015CP01U, and battery pack Model(s) 1015AB01,
AB24 and AB25 only. Use only UL Listed power supply, which has been qualified by Intermec with output rated at 12 VDC and 2.5 A
with the device. No user-serviceable parts.
Battery Information
Caution: Use only Intermec battery pack Model 1015AB01, AB24, or AB25. Use of incorrect battery pack may present risk of fire or
explosion. Promptly dispose of used battery pack according to the instructions.
The battery pack used with this product may ignite, create a chemical burn hazard, explode, or release toxic materials if mistreated.
Do not incinerate, disassemble, or heat above 100 °C (212 °F). Do not short circuit, may cause burns. Keep away from children.
Battery Recycling Information
This product contains or uses a lithium-ion (Li-ion) main battery. When the battery reaches the end of its useful life, the spent
battery should be disposed of by a qualified recycler or hazardous materials handler. Do not mix this battery with the solid
waste stream. Contact your Intermec Technologies Service Center for recycling or disposal information.
Li-ion Li-ion
For Users in the U.S.A. and Canada
U.S.A. Digital Emissions Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the radio or television receiving antenna.
• Increase the separation between the computer equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected.
• Consult the dealer or an experienced radio television technician for help.
Canadian Digital Apparatus Compliance
This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) This device must accept any interference received, including interference that can cause undesired
operation.
CAN ICES-3 (B)/NMB-3 (B)
For Users in Europe
CE Marking: Refer to the Declaration of Conformity for a list of the EU Directives and Standards that this product complies with.
Für Anwender in Deutschland (de)
Die Produktdokumentation ist unter www.honeywellaidc.com verfügbar.
Vorsicht: Diese Kennzeichnung weist darauf hin, dass der Benutzer vor dem Gebrauch alle mitgelieferten Unterlagen lesen soll.
Diese Ergänzung muss zur zukünftigen Bezugnahme aufgehoben werden.
Die Benutzer dieses Produkts werden darauf hingewiesen, nur Zubehörteile und Peripheriegeräte zu verwenden, die von Intermec
Technologies Corporation genehmigt sind. Falls nicht empfohlene Zubehörteile verwendet oder an diesem Produkt Änderungen
vorgenommen werden, die nicht von Intermec Technologies Corporation genehmigt sind, kann dadurch die behördliche Konformität des
Produkts verletzt werden und der Benutzer die Berechtigung zur Verwendung des Geräts verlieren.
Vorsicht: Zum Verwendung mit dem Intermec-Modellen CN50, 1015CP01, 1015CP01S, und 1015CP01U und Akkusatzmodellen
1015AB01, AB24 und AB25. Verwenden Sie für dieses Gerät nur ein UL-gelistetes und von Intermec vorgesehenes Netzteil mit einer
Ausgangsleistung von 12 V und 2.5 A Gleichstrom. Enthält keine Teile, die vom Benutzer gewartet werden können.
1