Klarstein New Breeze 7 Manual Del Usuario página 34

EN
34
1 On / off switch (ON / OFF)
Press to turn the device on or off. After startup,
(The colour of the display differs from model to model).
2 Mode
Press to go through and select the modes.
AUTO COOL
AUTO In automatic mode, the air conditioner will run automatically
depending on the ambient temperature. The set temperature cannot be
changed and is also not displayed. Press the FAN button to set the fan
level. and press to adjust the pan movement. Press
the swivel movement.
COOL When you select cooling mode, the air conditioner will run in cooling
mode. The
and [-] buttons to set the temperature. Press the FAN button to set the
fan level. Press
DRY The fan will run at low speed in dehumidification mode. You cannot
change the fan level in dehumidification mode. The
on the display. Press
FAN The device will only run in ventilation mode. All function symbols in the
display have gone out. The operating indicator will light up. With the
FAN button you can set the fan speed. Press
swivel movement.
HEAT The device will heat in this mode. The
display. Use the [+] and [-] buttons to set the temperature. Press
and to adjust the swivel movement. (Devices with exclusive cooling
do not receive a signal when you press the HEAT button.)
Note: To avoid a cold wind after starting, the indoor fan will start blowing with a
delay of 1-5 minutes. The exact time is determined by the room temperature. The
range of the adjustable temperature is between 16 ° C and 30 ° C. Possible fan
levels: auto, low, medium, high.
will light up green.
DRY FAN
symbol will appear on the display. You can press the [+]
and to adjust the swivel movement.
and to adjust the swivel movement.
HEAT
and to adjust
symbol appears
and to adjust the
symbol appears on the