Height Adjustment - Chicco Polly Magic Relax Manual De Instrucciones

FIRST USE/OPENING
WARNING: The product is inserted in the package
wrapped in a protective foil. When removing, make sure
to avoid damage to the product and its additional com-
ponents by cutting objects. Once the product is open,
quickly remove the packaging components and keep
them out of reach of children!
Once using the first time, the backrest needs to be
changed from packaging to use position, making it ro-
tate up until you hear the engagement click (Fig.1).
It is now no longer possible to return the backrest to
packaging position.
Insert the rear wheels (A6) in the specific slots (Fig.1A),
pushing them in as far as they will go.
WARNING: Check that pin B9 is always engaged cor-
rectly in the sliding hole B10 by pressing lightly on the
back toward the rear part of the highchair.
To open the frame, press simultaneously the A5 open-
ing/closing buttons, distancing the front legs A1 from
the rear legs A2 (Fig. 2) until the click indicates complete
opening.
Insert the footrest B3 in one of the four slots (Fig.3) of
the legrest B2 turning until it locks.
To put the cover on the seat B, after unfastening the
safety harness (Fig. 4), the cover B12 must be fitted from
the top to the bottom until it fits in the backrest part
(Fig. 5).
Put the cover B12 on the seat B, inserting the safety har-
ness B11 in appropriate cover holes. Make sure that the
positions of the holes on the fabric cover correspond to
those on the backrest.
SAFETY HARNESS
WARNING: The use of the safety harness with fabric crotch
strap is essential to guarantee the safety of your child.
WARNING: The tray alone does not guarantee the safe-
ty of your child. Always use the safety harness!
The highchair has a 5-point safety harness.
Release the safety harness, place the child on the high-
chair and secure the child with the harness, adjusting its
length so it suits the child.
The safety harness can be adjusted to two height positions.
The buckle may be released by pressing the forks.
The width of the waist belts can be adjusted using the
relevant sliding rings (Fig. 6).
TRAY POSITIONING/ADJUSTMENT
The tray can be adjusted to 4 different positions.
To fasten the tray C, turn the armrests B5 and make sure
that they are locked in horizontal position (Fig. 7).
Insert the armrests in the guides below the tray, keep-
ing the central fastening button C2 pressed (Fig. 8).
Move the tray to the desired position and release the
button. If the tray is not automatically locked on the
armrests, move the tray until a click is heard, indicating
that the tray has locked.
WARNING: before use, always check the correct fasten-
ing of the tray on the armrests.
WARNING: the tray may only be adjusted to the 4 indi-
cated positions.
WARNING: never leave the tray fitted in a position in
which the danger signs are visible on the armrests: This
position is NOT safe!
WARNING: When the tray is fitted on the product,
make sure to avoid the inadvertent pressing of the arm-
rest tilting buttons.
To remove the tray, press the central button C2. When
not in use, the tray may be fastened to the rear of the
structure (Fig. 9) in the relevant slots A4. The highchair is
equipped with a tray cover C1. It can be fastened to the
tray sides with a pressure mechanism.
WARNING: When in use, always make sure that the tray
is correctly fastened. If the child eats at the table with
the parents, the tray cover may be used as a convenient
place mat.
WHEELS
The rear legs have swivel wheels with brakes (A6).
The front legs of the highchair are equipped with one-
way wheels A3 to facilitate handling and opening/clos-
ing operations.
WARNING: always place the chair on a horizontal,
stable surface. Never place the highchair near stairs or
steps.
To activate the highchair brakes, lower the wheel lock-
ing levers. To release the brakes, raise the levers again
(Fig.10).

HEIGHT ADJUSTMENT

The highchair can be adjusted to 8 height positions.
To raise the seat, hold the upper part of the backrest and
pull it upwards, until the desired height is reached (Fig. 11).
To lower the seat, press the two B1 buttons at the
same time, lowering the seat until the desired height is
reached (Fig.12).
WARNING: do not carry out this operation with the
child sitting in the highchair.
HOW TO CLOSE THE CHAIR
WARNING: when performing this operation, ensure
that your child, or other children, are at a safe distance.
Make sure that during these operations the removable
parts of the highchair do not come into contact with
your child.
• Place the backrest in vertical position (Fig. 13), remove
the tray and fit it to the rear legs, then tilt the armrests
by pressing the buttons B6 (Fig. 14).
• Completely lower the seat by pressing the two height
adjustment buttons B1 at the same time.
• Press the opening/closing buttons A5 located at the
centre of the lateral joints and at the same time ap-
proach the legs of the highchair (Fig.15).
LEGREST
The highchair is equipped with a legrest B2 that can be
adjusted to 3 positions of use; press the two buttons B4
and tilt the legrest until reaching the desired position.
WARNING: The legrest can turn upward to non-usable
positions (Fig. 16)
13