Connect And Set Up; Position The Soundbar; Wall Mount The Soundbar (Optional) - Magnavox MSB4560 Manual De Propietario

Ocultar thumbs Ver también para MSB4560:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

4 Connect and set
up
This section helps you connect your SoundBar
to a TV and other devices, and then set it up.
For information about the basic connections of
your SoundBar and accessories, see the quick
start guide.
Note
at the back or bottom of the product.
Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.

4.1 Position the SoundBar

Place the subwoofer at least 1 meter (3 feet)
away from your SoundBar, and ten centimeters
away from the wall.
For best results, place your subwoofer as shown
below.
4.2 Wall mount the
SoundBar (optional)
Use screws
(not supplied)
for the wall material and strength. As a plaster
board wall is especially fragile, attach the
screws securely to a wall beam.
1) Drill two holes on the wall.
2) Secure the dowels and screws in the holes.
3) Hang the SoundBar on the fastening screws.
that are suitable
1
" 5
2 .
9 /
m
m
0 4
2 ~
Warning
Improper wall mounting may result in accident, injury or
damage. If you have any query, contact Consumer Care
in your country.
Before wall mounting, make sure the wall can support
the weight of your SoundBar.
Magnavox is not liable for improper wall mounting that
result in accident , injury or damage.
Install the Soundbar on a sturdy vertical wall.
Do not install the Soundbar onto a ceiling or slanted
wall
.
Do not use screws that are shorter than the
down easily.
Do not mount the Soundbar on a wall while the
Soundbar is plugged in or turned on, it may result in
an electrical shock injury.
3.5-4mm/0.14"-0.16"
4mm/
0.16"
>25mm/0.98"
EN
8
Tabla de contenido

Solución de problemas

loading

Tabla de contenido