Attach Fan Blades - NuTone CFC56BR Manual De Instrucciones

FINISH INSTALLATION
1. Tuck connections neatly into ceiling outlet box.
2. Slide the canopy up to mounting bracket and secure by tightening
the two set screws. (Fig. 9)
Note: Adjust the canopy screws as necessary until the canopy and
canopy cover are snug.
Warning: Make sure tab at bottom of hanger bracket is properly
seated in groove of hanger ball before attaching canopy to bracket.
Failure to properly seat tab in groove could cause damage to
electrical wiring.

ATTACH FAN BLADES

1. Fasten blade assembly to motor using the screws supplied. (Fig.
10)
2. Repeat for the two remaining blades.
MODELS CFC56BR • CFC56WH
OUTLET
BOX
HANGER
BRACKET
FIGURE 9
FIGURE 10
Page 5
SET
SCREWS
CANOPY
SCREWS
BLADES