NuTone CFC56BR Manual De Instrucciones página 4

Ventiladores de techo comerciales
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

CONNECT WIRING
Remember to disconnect the power. Follow the steps below to connect
the fan to your building/facility wiring. Use the wire nuts supplied with
your fan. Secure the connectors with electrical tape. Make sure there
are no loose strands or connections.
1. Connect the fan supply (black) wire and light supply (blue) wire to
the black household supply wire as shown in Figure 8.
2. Connect the neutral fan (white) wire to the white neutral household
wire.
3. Connect the fan ground wire (green) to the building/facility ground
wire.
4. After connecting the wires, spread them apart so that the green and
white wires are on one side of the outlet box and the black and the
blue wires are on the other side.
5. Turn the connecting nuts upward and push the wiring into the outlet
box.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR
OTHER PERSONAL INJURY, MOUNT FAN ONLY ON AN OUTLET
BOX OR SUPPORTING SYSTEM MARKED ACCEPTABLE FOR FAN
SUPPORT.
MODELS CFC56BR • CFC56WH
WALL
CONTROL
FAN
SWITCH
WALL
CONTROL
WIRING BOX
FAN
FIGURE 8
Page 4
120 VAC
LINE IN
GREEN GROUND
WIRING
BOX
GROUND TO
MOUNTING
BRACKET
OR DOWNROD
Tabla de contenido
loading

Este manual también es adecuado para:

Cfc56wh

Tabla de contenido