Product Features - Bosch GEN 230V-1500 Professional Manual Original

página de 109

/ 109
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

OBJ_BUCH-2703-004.book Page 14 Thursday, October 27, 2016 8:27 AM

14 | English



Under misuse conditions or after

damage liquid can be ejected from

the product, avoid all contact with

the product. If contact with the liquid

occurs, seek medical advice.



Only use Bosch Professional Garden

Tool recommended and approved ac-

cessories.



Do not use in elevated areas.



In addition, observe the safety in-

structions for all product used in con-

junction with this product.



For installation please refer to nation-

al wiring rules.



Switch off and remove plugs from

mains inlet and outlet sockets before

adjusting or manoeuvring, cleaning or

if the cable is entangled and before

leaving the product unattended for

any period. Keep the supply cable

away from any cutting blades or

sharp objects.

Safety warnings for power supply



The supply cord must be inspected

for signs of damage at regular inter-

vals and may only be used if in perfect

condition.



If the cord is damaged, it must be re-

placed by the manufacturer, its ser-

vice agent or similarly qualified per-

sons in order to avoid a hazard.



Do not run over, crush or pull the ca-

bles.



Protect the cables from heat, oil and

sharp edges.



The power supply is double insulated

for safety and requires no earth

connection while in inverting mode.

1 609 92A 3EZ | (27.10.16)

The output voltage is 230 V AC,

50 Hz. Contact your Bosch Service

Centre for details. If in doubt contact

a qualified electrician or the nearest

Bosch Service Centre.



Products sold in GB only: Your prod-

uct is fitted with a BS 1363/A ap-

proved electric plug with internal fuse

(ASTA approved to BS 1362).

If the plug is not suitable for your

socket outlets, it should be cut off

and an appropriate plug fitted in its

place by an authorised customer ser-

vice agent. The replacement plug

should have the same fuse rating as

the original plug.

The severed plug must be disposed of

to avoid a possible shock hazard and

should never be inserted into a mains

socket elsewhere.

Products sold in AUS and NZ only:

Use a residual current device (RCD)

with a rated residual current of 30 mA

or less.

The UK adapter is only to be used in

horizontal orientation for valid IP pro-

tection.

Intended Use

This product is intended for Professional use up to 1500 W.