Specifications - Cub Cadet CC4105 Manual Del Operador

ENGINE*
Engine Type................................................................................................................................................................. Air-Cooled, 4-Cycle
Displacement................................................................................................................................................................ 1.6 cu. in. (26.2 cc)
Clutch Type ................................................................................................................................................................................ Centrifugal
Operating RPM............................................................................................................................................................... 6,800 - 9,300 rpm
Idle Speed RPM ............................................................................................................................................................. 3,400 - 4,400 rpm
Ignition Type................................................................................................................................................................................. Electronic
Ignition Switch .......................................................................................................................................................................Rocker Switch
Valve clearance..................................................................................................................................... 0.003–0.006 in. (0.076–0.152 mm)
Spark Plug Gap ....................................................................................................................................................... 0.025 inch (0.635 mm)
Lubrication .................................................................................................................................................................................. SAE 30 Oil
Crankcase Oil Capacity ....................................................................................................................................................... 3.04 oz (90 ml)
Fuel .............................................................................................................................................................................................. Unleaded
Carburetor .............................................................................................................................................................. Diaphragm, All-Position
Starter...................................................................................................................................................................................... Auto Rewind
Muffler ............................................................................................................................................................................ Baffled with Guard
Throttle ...................................................................................................................................................................... Manual Spring Return
Fuel Tank Capacity............................................................................................................................................................... 18 oz (532 ml)
DRIVE SHAFT AND CUTTING ATTACHMENT*
Drive Shaft Housing ............................................................................................................................................ Steel Tube (Rapid-Link™)
Throttle Control ............................................................................................................................................................... Finger-Tip Trigger
Approximate Unit Weight (No fuel, with handle, shield and cutting attachment)...................................................................12 lbs (5.4 kg)
Cutting Mechanism ............................................................................................................................................................... Bump Head™
Line Spool.................................................................................................................................................................... Bump Line Releaser
Line Spool Diameter: .................................................................................................................................................... 3 inches (76.2 mm)
Trimming Line Diameter: ....................................................................................................................................... 0.080 inches (2.03 mm)
Cutting Path Diameter .............................................................................................................................................. 17 inches (431.8 mm)
* All specifications are based on the latest product information available at the time of printing. We reserve the right to make changes
at any time without notice.
16

SPECIFICATIONS