Trust ACM-1000 Manual De Instrucciones página 4

INSTALLATION
Wire colors may vary per country. Contact an electrician
when in doubt about wiring. This product is not suitable
if the existing light switch is interconnected to other light
switches for multiway switching.
MAXIMUM LOAD
Never connect lights or equipment that exceed the
maximum load of the receiver, as it can result in defects, a
short circuit or fire.
SHOCK HAZARD
Exercise caution when installing a receiver. Voltage may be
present, even when a receiver is switched off.
LIFE-SUPPORT
Never use Trust SmartHome products for life-support
systems or other applications in which equipment
malfunctions can have life-threatening consequences.
INTERFERENCE
All wireless devices may be subject to interference, which
could affect performance. The minimum distance between 2
receivers should be at least 50 cm.
LEGAL INFORMATION
CE: Trust declares this device complies with the Directives as listed in Section 2 of this document.
WEEE: Dispose of the device at a recycling centre. More information: www.trustsmarthome.com
Warranty information: www.trustsmarthome.com/warranty
ACM-1000 BUILD-IN SWITCH
REPAIRING
Do not attempt to repair this product. Only replace the fuse
if necessary.
WATER-RESISTANCE
This product is not water-resistant. Keep it dry. Moisture will
corrode the inner electronics and can result in a short circuit,
defects and shock hazard.
CLEANING
Use a dry cloth to clean this product. Do not use harsh
chemicals, cleaning solvents, or strong detergents.
HANDLING
Do not drop, knock, or shake the device. Rough handling can
break internal circuit boards and fine mechanics.
ENVIRONMENT
Do not expose the product to excessive heat or cold, as it
can damage or shorten the life of electronic circuit boards.
EN
2