Ec Declaration Of Conformity - Bresser CM-300 Información De Usuario

7 | About this Instruction Manual
4. The menu and the function keys appear on the display.
5. The device now ready for use.
7 Select modeling light mode
1. Tap OPTION key several times to set one of the following functions. The selected function (Free-
orProp) will be displayed next to the OPTION key.
– Free Modeling light power can be set independently of the flash power.
– Prop Modeling light power can be set only in dependence to the flash power.
2. Tap OPTION key several times until no function is displayed next to the key and the modeling light
is turned off completely.
8 Setting the modeling light brightness
1. Tap LAMP-UP key or LAMP-DOWN key to change the value for the modeling light brightness.
NOTICE! The setting range is between 1.0 and 6.0, whereby 1.0 is the lowest and 6.0 is the
highest value.
9 Setting the flash power
1. Tap FLASH-UP key or FLASH-DOWN key to change value for the flash power.
NOTICE! The setting range is between 1.0 and 6.0, whereby 1.0 is the lowest and 6.0 is the
highest value.
2. During the flash charging process, the bar graph above the TEST key is flashing. When the bar
graph stops flashing, the flash is ready for use.

10 EC Declaration of Conformity

Folux B.V. has issued a "Declaration of Conformity" in accordance with applicable guidelines
and corresponding standards.
11 Warranty
The regular guarantee period is 2 years and begins on the day of purchase. To benefit from an exten-
ded voluntary guarantee period as stated on the gift box, registration on our website is required.
You can consult the full guarantee terms as well as information on extending the guarantee period and
details of our services at www.bresser.de/warranty_terms.
8 / 9 Quickstart_CM-Flashes_de-en_BRESSER-PSE_v012017a