Screen Display; Setting Up Power Supply - Bresser CM-300 Información De Usuario

19 Fixing screw (rod connection)
Scope of delivery
Flash device (A); modeling lamp (B); flash tube (C); reflector attachment (D); power cable (E); instruc-
tion manual

4 Screen display

Illustration 2: Touch screen displays: start screen (left), function menu (right)
1 LOCK key
3 FLASH-UP key
5 FLASH-DOWN key
7 Inside temperature display (°C)
9 Fan symbol
11 SOUND key
13 Prop Symbol
15 Flash charging indicator
17 photo cell function indicator (1, 2, 3 or
none)
19 LIGHT-DOWN key
21 Light intensity display

5 Setting up power supply

1. Put the C13 coupling of the power cable into the C13 socket of the flash device.
2. Put the Euro-plug of the power cable into the wall socket (230V maximum voltage).
3. Move ON/OFF switch to position 'I' to turn on the device.
6 Start function menu.
1. Once the power supply was set up, the LOCK key and the ON/OFF key appear on the display.
2. If the child safety lock had been activated, tap LOCK key for approx 3 seconds to unlock the touch
panel. (see "Child safety lock")
3. Tap ON/OFF key to start the device.
Quickstart_CM-Flashes_de-en_BRESSER-PSE_v012017a
22
21
20
19
1 2
About this Instruction Manual | 4
20 C13 power cable with Euro-plug
3 4 5
18 17 16 15 1
2 ON/OFF key
4 Falsh power display
6 Flash counter
8 Fuse symbol
10 Acoustic signal symbol
12 OPTION key
14 Lock symbol
16 TEST key
18 CELL key
20 LIGHT-UP key
22 Free symbol
6
7
8
9
10
11
12
13
14
2
7 / 9