Packing List - Cramer 2400486 Manual De Instrucciones

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
SPECIFICATIONS
Type
Voltage
AIR volume
Air speed
Weight (Battery
Pack not included)
Battery Pack
Charger
Sound pressure
level
Sound power level
Vibration level
DESCRIPTION
See Figure 1.
1. Cruise Control Lever
2. Trigger
3. Blower tube
4. Groove
5. Tab
6. Lock position
7. Battery release button
ASSEMBLY
UNPACKING
„ Carefully remove the product and any accessories
from the box.
„ Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
„ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
„ If any parts are damaged or missing, please call
your Cramer service centre for assistance.

PACKING LIST

„ Blower
„ Blower tube
„ Operator's Manual
English (original instructions)
40B730
40V DC
12.2 m³/min
185 km/h
1.9 kg
40V110/40V220
40C120/40C60
LpA: 92.6 dB(A) K: 3 dB(A)
LwA: 105 dB(A)
ah=1.348 m/s ; K=1.5 m/s
2
Do not use this product if any parts on the Packing
List are already assembled to your product when
you unpack it. Parts on this list are not assembled
to the product by the manufacturer and require cus-
tomer installation. Use of a product that may have
been improperly assembled could result in serious
personal injury.
ASSEMBLING THE BLOWER TUBE
See Figure 2
To prevent accidental starting that could cause seri-
ous personal injury, always remove the batterypack
from the tool when assembling parts.
2
„ Align either of the grooves on the tube with the
tabs on the blower housing. Slide the tube onto the
blower housing until the tab engages the grooves.
„ Turn the tube in the direction of the arrow until both
of the tabs slide into the lock positions.
TO INSTALL/REMOVE BATTERY PACK
See Figure 3.
TO INSTALL BATTERY PACK
„ Align the ribs of the battery pack with the mounting
slots in the blower's battery port.
„ Insert the battery into the battery opening until the
battery release button locks into place.
When placing battery pack in the blower, be sure
the raised ribs on the battery pack align with the
grooves in the top of the blower. Make sure the bat-
tery is fully seated, and it latches into place properly.
Improper installation of the battery pack can cause
damage to internal components.
TO REMOVE BATTERY PACK
„ Press and hold the latch button with firm grip.
„ Grasp the trigger handle firmly. Pull the battery
pack out of the handle.
Always take care of your feet, children, or pets
around you when pressing the battery release but-
ton. Serious injury could result if the battery pack
falls. NEVER remove the battery pack when in a
high location.
1
WARNING
WARNING
CAUTION
WARNING