Rear Panel Connections - Arcam ST60 Manual De Instrucciones

Rear Panel Connections

POWER INLET
Connect the correct mains cable
here.
WiFi ANTENNA
POWER INLET
110-120V/220-240V ~ 50/60Hz
200W MAX
WiFi ANTENNA
Install WiFi antenna here if wireless
network connection is required.
See "Connecting to a Network" on
page EN-11 for details of how to
connect to a wireless network.
Please read the sections "Placing The Unit", "Power" and
"Interconnect Cables" on page EN-6 before connecting
your ST60!
RS232
This connection allows for remote
control from a third-party home
automation system. See "Home
Automation Control" on page EN-10.
NET
USB
5V 100mA
RS232
NETWORK
Connect this socket to a port on your
network router using an Ethernet patch
cable. See "Connecting to a Network" on
page EN-11 for details of how to connect to
a network.
NOTE: The use of a screened ethernet cable
is strongly recommended.
USB Type A
This USB socket is used playback
of audio files from USB drives. Can
also be used to perform software
updates.
EN-9
DIGITAL AUDIO INPUTS
Optical and coaxial digital audio
connectors. See "Digital Audio
Inputs" on page EN-10.
DIGITAL IN
1
DIGITAL OUT
3 4
2
DIGITAL AUDIO OUTPUTS
Optical and coaxial digital audio
output connectors. See "Digital
Audio Outputs" on page EN-10 and
"Digital Output" on page EN-13
NOTE: the ST60 digital output is
disabled by default.
ANALOGUE OUTPUTS
Single ended and balanced
analogue audio outputs. See
"Analogue Audio Outputs" on page
EN-10.
WiFi ANTENNA
ANALOGUE OUT
R
L
L
R
EN