Signature Kitchen Suite SKSSV3001S El Manual Del Propietario página 49

Symptoms
Food does not broil • Oven controls improperly set.
properly
• Improper rack position being used.
• Cookware not suited for broiling.
• Aluminum foil has been used on the broiling pan, grid has not been fitted
• In some areas the power (voltage) may be low.
Oven temperature too • Oven Sensor needs to be adjusted.
hot or too cold
Oven will not self • The oven temperature is too high to set a Self Clean operation.
clean
• Oven controls improperly set.
• A Self Clean cycle cannot be started if oven door is open.
Crackling or popping • This is the sound of the metal heating and cooling during both the cooking and
sound
Excessive smoking • Excessive soil.
during a Self Clean
cycle
Oven door does not • Oven is too hot.
open after a Self
Clean cycle
Oven not clean after a • Oven controls not properly set.
Self Clean cycle
• Oven was heavily soiled.
Door locked icon • The oven door is locked because the temperature inside the oven has not
shows in the display
when you want to
cook
Burning or oily odor • This is normal in a new oven and will disappear in time.
emitting from the vent
Possible Causes / Solutions
− See the Broil Section.
− See the Broiling Guide.
− Use the broiling pan and grid that came with your oven.
properly, or slits are not on correct side.
− See the Using the Oven Section.
− Preheat the broil element for 10 minutes.
− See the Broiling Guide.
− See Temperature Adjustment in the Changing Oven Settings section.
− Allow the oven to cool and reset the controls.
− See the Self Clean section.
cleaning functions.
− This is normal.
− Set both Oven Mode knobs to the OFF position or press the STOP button.
Open the windows to rid the room of smoke. Wait until the Self Clean mode is
cancelled. Wipe up the excess soil and restart the Self Clean cycle.
− Allow the oven to cool below locking temperature.
− See the Self Clean section.
− Clean up heavy spillovers before starting the clean cycle. Heavily soiled ovens
may need to self-clean again or for a longer period of time.
dropped below the locking temperature.
− Press the STOP button. Allow the oven to cool.
− To speed the process, set a Self Clean cycle for a minimum of 3 hours. See
the Self Clean section.
TROUBLESHOOTING 49